Tag Archives: sleeve coupling

China Custom Lt/Zt/FT Pin Coupling PU Rubber Elastic Sleeve

Product Description

Product Description

LT/ZT/FT Pin Coupling PU Rubber Elastic Sleeve
The elastomer insert is equalizing element of coupling. It transmits torque without backlash or vibration. The elastomer insert defines the characteristics of the entire drive system. Backlash is eliminated by the press fit of the elastomer into the hubs. Through variation of the shore hardness of the elastomer insert, the coupling system can be optimized for the ideal torsional characteristics.

LT Pin Coupling Elastic Sleeve (Smooth Bushing)

Part No. Specification Ref. Picture
d D L
LT-8 8 16 10
LT-10 10 19 15
LT-12 12 24 28
LT-14 14 26 28
LT-18 18 35 36
LT-24 24 45 44
LT-30 30 56 56
LT-38 38 71 72
LT-45 45 85 88

ZT Pin Coupling Elastic Sleeve (Four Component Combined Elastic Sleeve)

Part No. d D L Ref. Picture
ZT-8 8 16 10
ZT-10 10 19 15
ZT-14 14 28 27
ZT-18 18 36 35
ZT-24 24 45 44
ZT-30 30 56 55
ZT-38 38 71 72
ZT-45 45 85 88

 

 

FT Pin Coupling Elastic Sleeve Ring (Splited Elastic Ring Gasket)

Part No. d D L Ref. Picture
FT-10 10 20 7
FT-12 12 24 7
FT-14 14 28 7
FT-14 14 29 7
FT-18 18 36 9
FT-18 18 38 9
FT-24 24 45 11
FT-24 24 48 11
FT-28 28 56 15
FT-30 30 56 15
FT-30 30 62 14
FT-38 38 71 18
FT-45 45 91 22
FT-45 45 85 23

LT/ZT/FT Pin Coupling PU Rubber Elastic Sleeve

More Products:

Various types of couplings rubber elastomer models are as follows:

MT rubber coupling (MT1-MT13),

GR rubber coupling (GR10-GR180),

GS rubber coupling (GS7-GS90),

T Hexagon back wheel coupling (hexagonal elasticity pad T70 ~ 210).,

the fluid coupling (YOX),

L-type claw coupling hexagonal coupling (L35-L276),

H-type elastic block (H80-H350),

NM couplings elastomer (NM50 -NM214).

HRC Coupling elastomer (HRC60-HRC280).

Gear Sleeve Rubber Coupling Elastomer cushion (gear 4J-10J).

NL inner tooth gear coupling sleeve (NL1-NL10).

Oldham and non-standard high strength Spider rubber coupling. 

Main Products:

custom couplings Plum pad, HRC couplings, Martin couplings, HRC couplings supply elastomer, HRC couplings elastic block, Gear Sleeve Rubber Coupling Elastomer, block rubber supply couplings, coupling rubber parts, coupling is rubber body, ZheJiang custom rubber gear coupling, screw compressor couplings, rubber supply gear couplings, Atlas coupling, screw compressor coupling, ZheJiang  wholesale production of polyurethane gear, supply H-linking couplings, H-shaped elastic block coupling, H-type coupling rubber elastomer blocks

Please inquire us if you need Rubber Coupling Elastomer and other types couplings inserts.

Different  Types  Of  Hydraulic  Seals
Application Type Material
Rod Seals UN  TPU(PU,Polyurethane) 
UNS  TPU(PU,Polyurethane)
UHS  TPU(PU,Polyurethane)
IDU  TPU(PU,Polyurethane)
U+S  PU+NBR
UPH  NBR & FKM
Step Seal  NBR+PTFE
VES  Rubber+Fabric
IDI  PU
ISI  PU
Piston Seals SPG  NBR+PTFE
SPGW  NBR+PTFE
SPGO  NBR+PTFE
KDAS  NBR+PU+POM
ODI  PU
OSI  PU
ODU  PU
Dust Wiper Seals DH/DHS  PU
LBH  NBR & FKM 
J/JA  PU
DKB  NBR & FKM +Metal
DKBI  PU+Metal
DSI  PU
Wear Ring WR  Phenolic Fabric
Xihu (West Lake) Dis. Tape  PTFE
Xihu (West Lake) Dis. Tape  Phenolic Fabric
Buffer Seal HBY  PU+Nylon
Back-up Ring O-Ring  NBR & FKM
X-Ring  NBR & FKM
PTFE Washer  PTFE

LT/ZT/FT Pin Coupling PU Rubber Elastic Sleeve

Different   Type   Rotary   Shaft   Oil   Seal
Type Material Lip Spring Feature
TC NBR & FKM Double Lips Single Metal Coverd Rubber
TB NBR Double Lips Single Metal Case
TA NBR Double Lips Single Metal Case
SC NBR & FKM Single Single Double Metal Shell
SB NBR Single Single Metal Case
SA NBR Single Single Double Metal Shell
DC NBR Double Lips Double Double Springs
VC NBR & FKM Single Without Metal Coverd Rubber
VB NBR Single Without Metal Case
TCV NBR Double Lips Single High Pressure
TCN NBR Double Lips Single High Pressure
PTFE PTFE Single & Double Lips Without Stainless steel
HTCL NBR & FKM Double Lips Single Inside thread L
HTCR NBR & FKM Double Lips Single Inside thread R
……………………………………………………………………………………………
More types please contact us. 
Customization is welcome.

Related Products

LT/ZT/FT Pin Coupling PU Rubber Elastic Sleeve
Oil seals serve to prevent the leakage not only of lubricants, but also water, chemicals, and gas from “gaps” in machinery. Oil seals also serve to prevent the intrusion of dust, soil and sand from the outside air.

Company Profile

HangZhou CHINAMFG Sealing Sci-Tech Co., Ltd. is a scientific and technological production enterprise integrating R&D, production and sales. Our production plant covers an area of about 2,000 square CHINAMFG and has 150 employees.

QMS (Quality Management System):
ISO9001, ISO/TS16949

Our Products: 
O Ring, Oil Seal, Hydraulic & Pneumatic Seal, Custom CHINAMFG Parts

Production Standard: 
ASTMD2000

Product Application Scope:
Engineering machinery, hydraulic pneumatic, petroleum and natural gas, automobile seals, valves and pipelines, electronic home appliances, food grade, electric power, chemical industry, coal mine, metallurgy, engineering shield machine and other industries, supporting domestic automobile and machinery manufacturers.

We had sell to:  
More than 40 countries including the United States, Germany, Japan, Britain, Italy, Spain, Russia, Canada, Australia, Malaysia, Philippines, Indonesia, Mexico, Brazil, Peru, Chile, Argentina, Israel, Saudi Arabia, Lebanon, Ukraine, Pakistan, Thailand, Vietnam, etc. 

Packaging & Shipping

LT/ZT/FT Pin Coupling PU Rubber Elastic Sleeve
Ship by express, by air, by sea at buyer’s option.
 rubber oil seal tc oil seal rubber seal manufacturer oil seal tc nbr oil seal tc oil seal fkm oil seal china manufacturer oil seal tc oil seal nbr tc oil seal fkm tc oil seal manufacturer

FAQ

Q 1. What’s the payment term?
A: We accept T/T 50% deposit and 50% balance against copy of B/L or L/C at sight, West Union,VISA,Paypal is also accepted. rubber oil seal tc oil seal rubber seal manufacturer oil seal tc nbr oil seal tc oil seal fkm oil seal china manufacturer oil seal tc oil seal nbr tc oil seal fkm tc oil seal manufacturer
Q 2. What is the normal lead time for product orders?
A: Generally it is 1-2 days if the goods are in stock. or it is 5-10 days if the goods are not in stock, it is according to quantity.tc oil seal tc oil seal nbr tc oil seal nbr rubber oil seal fkm oil seal fkm rubber oil seal manufacture china oil seal

 tc oil seal tc oil seal nbr tc oil seal nbr rubber oil seal fkm oil seal fkm rubber oil seal manufacture china oil seal manufacture

 Q 3. What is your standard packing?
A: All the goods will be packed by carton box and loaded with pallets. Special packing method can be accepted when needed.rubber oil seal tc oil seal rubber seal manufacturer oil seal tc nbr oil seal tc oil seal fkm oil seal china manufacturer oil seal tc oil seal nbr tc oil seal fkm tc oil seal manufacturer

Q 4. Could you please tell us the month capacity of your products ?
A: It depends on which model, we produce more than 2500 tons rubber materials per month.

tc oil seal tc oil seal nbr tc oil seal nbr rubber oil seal fkm oil seal fkm rubber oil seal manufacture china oil seal manufacture
Q 5. what kind of certificates you have ?
A1: We have been ISO9001:2008 and ISO14001:2004 certified by SGS since 2015.
A2: We have various rubber compounds approved by ROHS and REACH.

tc oil seal tc oil seal nbr tc oil seal nbr rubber oil seal fkm oil seal fkm rubber oil seal manufacture china oil seal manufacture
Q6: How to check the quality of the bulk order?
A1: We provide preproduction samples before mass production for all customers if needed.
A2: We accept third party inspection such as TUV, INTERTEK, BV, etc.

tc oil seal tc oil seal nbr tc oil seal nbr rubber oil seal fkm oil seal fkm rubber oil seal manufacture china oil seal manufacture
Q 7: Do you use any international standards for the rubber products?
A: Yes, we mainly use ASTM D2000 standard to define the quality of the rubber materials, tolerances as per ISO3302, ISO2768, etc.rubber oil seal tc oil seal rubber seal manufacturer oil seal tc nbr oil seal tc oil seal fkm oil seal china manufacturer oil seal tc oil seal nbr tc oil seal fkm tc oil seal manufacturer

Q8: What materials are available to produce from your side?
A: NBR, EPDM, SILICONE, FPM(FKM), NEOPRENE(CR), NR, IIR, SBR, ACM, AEM, Fluorosilicone(FVMQ), FFKM, Liquid Silicone, Sponge, etc. tc oi
l seal tc oil seal nbr tc oil seal nbr rubber oil seal fkm oil seal fkm rubber oil seal manufacture china oil seal manufacture

Q9: Do you provide maintenance on tooling?
A: We maintain all tooling and will replace as needed.tc oil seal tc oil seal nbr tc oil seal nbr rubber oil seal fkm oil seal fkm rubber oil seal manufacture china oil seal manufacture

Q10: How many empolyees you have?
A:We have 150 empolyees at time of December 2571. tc oil seal tc oil seal nbr tc oil seal nbr rubber oil seal fkm oil seal fkm rubber oil seal manufacture china oil seal manufacture

If you have any other question, please don’t hesitate to contact us:

LT/ZT/FT Pin Coupling PU Rubber Elastic Sleeve /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

rubber coupling

Maintaining and Preserving Rubber Coupling Performance

To ensure the longevity and optimal performance of rubber couplings, the following best practices should be observed:

  • Regular Inspections: Perform visual inspections for signs of wear, cracks, or damage.
  • Lubrication: Apply appropriate lubricants to minimize friction and extend rubber life.
  • Alignment: Maintain proper alignment between connected shafts to prevent undue stress on the coupling.
  • Temperature Control: Monitor operating temperatures to prevent overheating that can accelerate rubber degradation.
  • Load Monitoring: Avoid overloading the coupling beyond its rated capacity.
  • Vibration Analysis: Monitor vibration levels and address excessive vibrations promptly.
  • Regular Maintenance: Follow manufacturer’s recommendations for maintenance schedules.
  • Replacement: Replace worn or damaged rubber elements as needed.

By adhering to these practices, the performance and service life of rubber couplings can be effectively preserved.

rubber coupling

Comparison of Rubber Couplings with Other Flexible Coupling Types

Rubber couplings, elastomeric couplings, and disc couplings are all flexible coupling options used in various mechanical systems. Here’s a comparison of rubber couplings with these alternatives:

Rubber Couplings:

  • Transmit torque while damping vibrations through the flexibility of rubber elements.
  • Provide good misalignment compensation and shock absorption.
  • Relatively simple construction and cost-effective.
  • Effective in reducing noise and vibration in applications.
  • Suitable for moderate to high torque applications with moderate misalignment.

Elastomeric Couplings:

  • Similar to rubber couplings, utilize elastomeric materials for flexibility and vibration damping.
  • Offer higher torque capacity and stiffness compared to rubber couplings.
  • Provide better misalignment compensation and torsional stiffness.
  • Wider range of sizes and configurations for various applications.
  • Commonly used in pumps, compressors, and other machinery.

Disc Couplings:

  • Use a series of metal discs to transmit torque and accommodate misalignment.
  • Offer high torsional stiffness and accuracy in torque transmission.
  • Can handle higher speeds and torque compared to rubber or elastomeric couplings.
  • Require precision in manufacturing and installation.
  • Used in applications requiring high precision and minimal backlash.

When choosing between these flexible coupling types, considerations such as torque requirements, misalignment compensation, torsional stiffness, and application-specific needs play a significant role in making the appropriate selection. Each type has its advantages and limitations, making it important to assess the specific requirements of the machinery system.

rubber coupling

Utilization of Rubber Couplings in Mechanical Systems

A rubber coupling is a type of flexible coupling that utilizes rubber elements to connect two shafts while allowing a certain degree of misalignment and vibration damping. It is commonly used in mechanical systems to transmit torque, accommodate misalignment, and reduce shock and vibration. Here’s how rubber couplings are utilized:

  • Torque Transmission: Rubber couplings transmit torque from one shaft to another, enabling the transfer of power between components while allowing for slight angular, parallel, and axial misalignments.
  • Misalignment Compensation: These couplings can accommodate both angular and axial misalignments, which can occur due to manufacturing tolerances, thermal expansion, or other factors. The flexibility of the rubber element helps prevent excessive loads on connected equipment.
  • Vibration Damping: The elastic properties of rubber help dampen vibrations and shocks generated during the operation of rotating machinery. This prevents the transmission of harmful vibrations to other parts of the system and reduces wear and fatigue.
  • Noise Reduction: Rubber couplings help reduce noise by absorbing vibrations and minimizing the transmission of sound waves through the system.
  • Equipment Protection: By absorbing shocks and vibrations, rubber couplings protect sensitive equipment and components from damage, thereby extending their lifespan.
  • Simple Installation: Rubber couplings are relatively easy to install and require minimal maintenance, making them a convenient choice for various applications.
  • Wide Range of Applications: Rubber couplings find applications in various industries, including automotive, industrial machinery, pumps, compressors, and more.

In summary, rubber couplings are utilized in mechanical systems to transmit torque, accommodate misalignment, reduce vibration and shock, protect equipment, and enhance the overall performance and reliability of rotating machinery.

China Custom Lt/Zt/FT Pin Coupling PU Rubber Elastic Sleeve  China Custom Lt/Zt/FT Pin Coupling PU Rubber Elastic Sleeve
editor by CX 2024-05-16

China manufacturer Stainless Steel Ss201 Double-Section Pipe Repair Coupling with CHINAMFG Rubber Sealing Sleeve

Product Description

  Stainless Steel Ss201 Double-Section Pipe Repair Coupling with CHINAMFG Rubber Sealing Sleeve

Product Parameters

 

Material:

Name Double-Section Pipe Repair Coupling
Shell, Bridge Plate, Bolts and Gear -Ring Stainless steel 201/304/316          
EPDM/NBR  Rubber Sealing Sleeve Temperature:(-20ºC~+140ºC) 
Medium Available for various kinds of Water, drainage,air,solid and chemicals

Product Description

Product Features:

Double-Section Pipe Repair Coupling is manily used on the connection of new pipelines and also for the repairing of pipe leaks. Repairing the pin holds and breaks caused by aging or rusting. It has advantages of working under pressure and no need of changing pipes,Safe,convenient ,effciency and easy to work with. Performs well in mal-condition.

Applied Pipeline: 
Crude Oil Pipeline,Gas/Natural,Gas/Fuel Pipeline,Supply/Drainage Water Pipeline,Aviation/Automotive Special Pipeline,Lubricating Oil Pipeline,Mud Slag Pipeline,Suction Pipeline,Flushing Power Pipeline,Cable Protection Pipeline, Sea/Fresh Water Pipeline,Turbine Pipeline,Air Conditioning Pipeline,Fire Line,Ventiation Pipeline,Compressed Air Pipeline and etc…

Detailed Photos

——RELATED  PRODUCTS——

Company Profile

 

ZheJiang CHINAMFG COMMERCIAL CO.,LTD (hereinafter referred to as the “DEKO group”), the company is located in China’s “Land of Casting” -ZheJiang province, we are engaged in the wholesale, retail, research and development and sales of products for the integration of import and export company and we assembled fist-class factories in domestic, using the most advanced production facilities and technology to provide the best quality for our customers, DEKO groups products has been covered in the municipal engineering projects, drainage system, constructions, fire control system and urban public facilities related products, such as Cast Pipe,Pipe Fitting,Valve, Manhole cover, Hardware products, Aluminum die casting, Aluminium profile, Public Illumination,Urban Furnishing,Flange and Pipe Repair Clamps etc., CHINAMFG group has been undertaking some domestic and foreign projects every year round and has always been praised by our customers. At present our products have been exported to Europe, South America,Africa, Asia, Middle East and Southeast Asia etc.

DEKO group adhering to the”first-class brand,first-class service”purpose, to keep improving product quality as the basis and advancing with the times, providing high quality, high standard products to our customers, CHINAMFG group will develop into a”first-class products,first-class quality,first-class service”global company in future.
Q. Do you accept OEM service?
A: Yes, we do.

Q. Can I get free samples?
A: Yes, And you only need to bear the delivery costs, if the samples are not too big.

Q.What information should I let you know if I want to get a quotation?
A: Size, design standard, material, package, Quantities, etc…

Q.How can you assure your quality?
A:We have equipped the modern quality control system as well as our quality engineer always check step by step from mold ,production before shipment. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

rubber coupling

Diagnosing and Troubleshooting Rubber Coupling Issues

Diagnosing and troubleshooting problems with rubber couplings in machinery systems involves a systematic approach:

  1. Visual Inspection: Check for signs of wear, cracking, or deformation in the rubber elements.
  2. Vibration Analysis: Monitor vibration levels using sensors to identify excessive vibrations or irregular patterns.
  3. Noise Assessment: Listen for unusual noises during operation, which could indicate misalignment or worn components.
  4. Temperature Check: Monitor the operating temperature of the coupling, as overheating might indicate issues.
  5. Alignment Check: Ensure proper alignment between connected shafts to prevent excessive stress on the coupling.
  6. Torque Measurement: Measure the transmitted torque to identify any discrepancies from the expected values.
  7. Dynamic Testing: Conduct dynamic tests with load variations to identify performance issues.
  8. Comparative Analysis: Compare coupling behavior to baseline performance data.

If any issues are identified, they should be promptly addressed through proper maintenance, realignment, or replacement of damaged components.

rubber coupling

Handling Torque and Vibration Suppression in Rubber Couplings

Rubber couplings are designed to effectively handle both high levels of torque transmission and vibration suppression. The flexibility and damping properties of rubber make it well-suited for these purposes:

  • Torque Transmission: Rubber couplings can transmit torque between shafts while accommodating angular misalignment. The rubber element flexes and deforms as torque is applied, allowing the coupling to transmit power even in misaligned conditions.
  • Vibration Suppression: Rubber’s inherent damping characteristics help absorb and dissipate vibrations and shocks generated during the operation of machinery. This feature reduces the transfer of vibrations to connected components, minimizing wear and enhancing overall system performance.

Engineers select the appropriate rubber material and coupling design to ensure that the coupling can effectively handle the required torque levels and provide the desired vibration suppression. Rubber couplings find applications in various industries where torque transmission and vibration damping are critical for smooth and reliable machinery operation.

rubber coupling

Utilization of Rubber Couplings in Mechanical Systems

A rubber coupling is a type of flexible coupling that utilizes rubber elements to connect two shafts while allowing a certain degree of misalignment and vibration damping. It is commonly used in mechanical systems to transmit torque, accommodate misalignment, and reduce shock and vibration. Here’s how rubber couplings are utilized:

  • Torque Transmission: Rubber couplings transmit torque from one shaft to another, enabling the transfer of power between components while allowing for slight angular, parallel, and axial misalignments.
  • Misalignment Compensation: These couplings can accommodate both angular and axial misalignments, which can occur due to manufacturing tolerances, thermal expansion, or other factors. The flexibility of the rubber element helps prevent excessive loads on connected equipment.
  • Vibration Damping: The elastic properties of rubber help dampen vibrations and shocks generated during the operation of rotating machinery. This prevents the transmission of harmful vibrations to other parts of the system and reduces wear and fatigue.
  • Noise Reduction: Rubber couplings help reduce noise by absorbing vibrations and minimizing the transmission of sound waves through the system.
  • Equipment Protection: By absorbing shocks and vibrations, rubber couplings protect sensitive equipment and components from damage, thereby extending their lifespan.
  • Simple Installation: Rubber couplings are relatively easy to install and require minimal maintenance, making them a convenient choice for various applications.
  • Wide Range of Applications: Rubber couplings find applications in various industries, including automotive, industrial machinery, pumps, compressors, and more.

In summary, rubber couplings are utilized in mechanical systems to transmit torque, accommodate misalignment, reduce vibration and shock, protect equipment, and enhance the overall performance and reliability of rotating machinery.

China manufacturer Stainless Steel Ss201 Double-Section Pipe Repair Coupling with CHINAMFG Rubber Sealing Sleeve  China manufacturer Stainless Steel Ss201 Double-Section Pipe Repair Coupling with CHINAMFG Rubber Sealing Sleeve
editor by CX 2024-04-25

China OEM FCL224 Cast Iron Flexible Coupling Elastic Sleeve Pin Couplings FCL Rubber Couplings

Product Description

Product Description

Company profile
HangZhou Terry Machinery Co.Ltd is a leading supplier of bearings, Linear motion system for CNC , Ball transfer Unit
and transmission component .the growing industrial and Favorable policy of HangZhou benefit the development of Terry
Machinery .Our products are utilized in industrial, motorcycle, vehicle and Automation applications. Now we are exporting
to 46 countries.including USA, GBR , Germany , Spain, Poland ,Turkey ect .The Goal of Terry Machinery to provide out
customers with widest range of products at competitive prices, backed with the best Service.OUR ADVANTAGE Products
Our major products & Supplied:Meet all the international standards and ISO9001 -TS1694 Certificate Big volume in Stock,
No MOQ required Personnel Our salespersons are well trained to accommodate your requests and speak English for your
conveniences.Our technicians and engineers Experience in the Industry area exceeds 23 years Service &Quality control ,
We supply detailed drawings and offer when ever necessary,We help all customers promote and improve their sales.We
inspect every piece of products by ourselves before delivery.

Customer Praise

FAQ
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

rubber coupling

Diagnosing and Troubleshooting Rubber Coupling Issues

Diagnosing and troubleshooting problems with rubber couplings in machinery systems involves a systematic approach:

  1. Visual Inspection: Check for signs of wear, cracking, or deformation in the rubber elements.
  2. Vibration Analysis: Monitor vibration levels using sensors to identify excessive vibrations or irregular patterns.
  3. Noise Assessment: Listen for unusual noises during operation, which could indicate misalignment or worn components.
  4. Temperature Check: Monitor the operating temperature of the coupling, as overheating might indicate issues.
  5. Alignment Check: Ensure proper alignment between connected shafts to prevent excessive stress on the coupling.
  6. Torque Measurement: Measure the transmitted torque to identify any discrepancies from the expected values.
  7. Dynamic Testing: Conduct dynamic tests with load variations to identify performance issues.
  8. Comparative Analysis: Compare coupling behavior to baseline performance data.

If any issues are identified, they should be promptly addressed through proper maintenance, realignment, or replacement of damaged components.

rubber coupling

Industry Standards and Guidelines for Rubber Couplings

There are no specific industry standards or guidelines that exclusively govern the design and application of rubber couplings. However, various general standards and engineering practices apply to flexible couplings, including rubber couplings:

  • ISO 14691: This standard provides guidelines for the installation, use, and maintenance of industrial flexible couplings, which include rubber couplings.
  • AGMA 9005: The American Gear Manufacturers Association (AGMA) standard provides information on selecting lubricants and lubrication methods for flexible couplings, ensuring proper performance and longevity.
  • API 671: This API standard specifies the requirements for special-purpose couplings used in petroleum, chemical, and gas industry services, which can include rubber couplings for specific applications.
  • Manufacturer Recommendations: Many rubber coupling manufacturers provide guidelines, specifications, and installation instructions for their products, helping users select the right coupling and use it correctly.

Since rubber couplings fall under the category of flexible couplings, engineers and designers can follow these broader standards and best practices while considering the specific characteristics and performance requirements of rubber couplings for their applications.

rubber coupling

Factors to Consider When Selecting a Rubber Coupling

Choosing the right rubber coupling for a specific application involves considering various factors:

1. Torque Requirements: Evaluate the torque that needs to be transmitted between the input and output shafts. Select a coupling with a rubber element that can handle the required torque without exceeding its limits.

2. Misalignment Compensation: Determine the degree of misalignment (angular, axial, and radial) present in the system. Choose a rubber coupling with appropriate flexibility to accommodate the expected misalignment while maintaining efficient torque transmission.

3. Vibration Damping: Assess the level of vibrations and shocks in the application. Opt for a rubber coupling with effective vibration-damping properties to protect the machinery and enhance its reliability.

4. Service Environment: Consider the operating conditions, including temperature, humidity, exposure to chemicals, and potential contaminants. Select a rubber material that can withstand the environment without deteriorating.

5. Shaft Sizes: Ensure that the coupling’s bore sizes match the shaft diameters of the connected equipment. Proper shaft fitment is crucial for efficient torque transmission.

6. Maintenance Requirements: Evaluate the maintenance practices of the system. Some rubber couplings may require periodic inspection and replacement due to wear over time.

7. Cost and Budget: Factor in the budget constraints while choosing a suitable rubber coupling. Balancing performance and cost is essential for an optimal solution.

8. Application Type: Different industries and applications have unique requirements. Choose a coupling type (spider, jaw, tire, etc.) based on the specific needs of the application.

By carefully considering these factors, you can select a rubber coupling that provides efficient torque transmission, vibration isolation, and durability in your mechanical system.

China OEM FCL224 Cast Iron Flexible Coupling Elastic Sleeve Pin Couplings FCL Rubber Couplings  China OEM FCL224 Cast Iron Flexible Coupling Elastic Sleeve Pin Couplings FCL Rubber Couplings
editor by CX 2024-04-12

China wholesaler Stainless Steel Ss201 Double-Section Pipe Repair Coupling with CZPT Rubber Sealing Sleeve

Product Description

  Stainless Steel Ss201 Double-Section Pipe Repair Coupling with CZPT Rubber Sealing Sleeve

Material:

Name Double-Section Pipe Repair Coupling
Shell, Bridge Plate, Bolts and Gear -Ring Stainless steel 201/304/316          
EPDM/NBR  Rubber Sealing Sleeve Temperature:(-20ºC~+140ºC) 
Medium Available for various kinds of Water, drainage,air,solid and chemicals

Product Features:
Double-Section Pipe Repair Coupling is manily used on the connection of new pipelines and also for the repairing of pipe leaks. Repairing the pin holds and breaks caused by aging or rusting. It has advantages of working under pressure and no need of changing pipes,Safe,convenient ,effciency and easy to work with. Performs well in mal-condition.

Applied Pipeline: 
Crude Oil Pipeline,Gas/Natural,Gas/Fuel Pipeline,Supply/Drainage Water Pipeline,Aviation/Automotive Special Pipeline,Lubricating Oil Pipeline,Mud Slag Pipeline,Suction Pipeline,Flushing Power Pipeline,Cable Protection Pipeline, Sea/Fresh Water Pipeline,Turbine Pipeline,Air Conditioning Pipeline,Fire Line,Ventiation Pipeline,Compressed Air Pipeline and etc…

——RELATED  PRODUCTS——

ZheJiang CZPT COMMERCIAL CO.,LTD (hereinafter referred to as the “DEKO group”), the company is located in China’s “Land of Casting” -ZheJiang province, we are engaged in the wholesale, retail, research and development and sales of products for the integration of import and export company and we assembled fist-class factories in domestic, using the most advanced production facilities and technology to provide the best quality for our customers, DEKO groups products has been covered in the municipal engineering projects, drainage system, constructions, fire control system and urban public facilities related products, such as Cast Pipe,Pipe Fitting,Valve, Manhole cover, Hardware products, Aluminum die casting, Aluminium profile, Public Illumination,Urban Furnishing,Flange and Pipe Repair Clamps etc., CZPT group has been undertaking some domestic and foreign projects every year round and has always been praised by our customers. At present our products have been exported to Europe, South America,Africa, Asia, Middle East and Southeast Asia etc.

DEKO group adhering to the”first-class brand,first-class service”purpose, to keep improving product quality as the basis and advancing with the times, providing high quality, high standard products to our customers, CZPT group will develop into a”first-class products,first-class quality,first-class service”global company in future.

Q. Do you accept OEM service?
A: Yes, we do.

Q. Can I get free samples?
A: Yes, And you only need to bear the delivery costs, if the samples are not too big.

Q.What information should I let you know if I want to get a quotation?
A: Size, design standard, material, package, Quantities, etc…

Q.How can you assure your quality?
A:We have equipped the modern quality control system as well as our quality engineer always check step by step from mold ,production before shipment.

 

rubber coupling

Minimizing Resonance and Improving Machinery Performance with Rubber Couplings

A rubber coupling can play a significant role in minimizing resonance and enhancing the overall performance of machinery by effectively damping vibrations and reducing the risk of resonance-related issues. Resonance is a phenomenon where a mechanical system’s natural frequency matches the frequency of external vibrations, leading to amplified oscillations and potential damage.

The following ways illustrate how rubber couplings contribute to minimizing resonance and improving machinery performance:

  • Vibration Damping: Rubber couplings utilize the inherent damping properties of elastomers to absorb and dissipate vibrations generated during operation. These vibrations can include those caused by unbalanced loads, eccentricities, or other disturbances. By damping these vibrations, rubber couplings prevent them from building up and causing resonance.
  • Vibration Isolation: Rubber couplings act as isolators by decoupling the connected components from each other. This isolation prevents vibrations from being transmitted directly from one component to another, thereby reducing the potential for resonance to occur.
  • Misalignment Compensation: Rubber couplings can accommodate misalignments between shafts, which often contribute to excessive vibrations. By allowing a certain degree of misalignment, the coupling prevents additional forces that could trigger resonance.
  • Reduced Stiffness: The flexibility of the elastomer elements in rubber couplings can reduce the overall stiffness of the system. A lower stiffness helps avoid the amplification of resonance by allowing some deformation of the coupling under varying loads and conditions.
  • Dynamic Absorption: Rubber couplings are effective at absorbing dynamic loads, including sudden shocks or impacts. These dynamic events can excite resonance, and the coupling’s ability to absorb and disperse such forces helps prevent resonance-related issues.

By effectively dampening vibrations, isolating components, and accommodating misalignments, rubber couplings can help minimize the risk of resonance-related problems. Engineers and designers must carefully select the appropriate rubber coupling type, elastomer material, and design to match the specific machinery and operating conditions, thereby ensuring improved machinery performance and longevity.

rubber coupling

Signs of Wear or Deterioration in Rubber Couplings

Rubber couplings can show signs of wear and deterioration over time due to factors like torque, temperature, and environmental conditions. To identify potential issues, watch out for the following signs:

  • Visible Cracks or Damage: Inspect the rubber element for visible cracks, tears, or physical damage. Such issues can weaken the coupling’s torque transmission and vibration damping capabilities.
  • Reduced Flexibility: Stiff or less flexible rubber indicates material degradation, which can impact the coupling’s ability to accommodate misalignment and absorb vibrations.
  • Increased Vibrations: Excessive machinery vibrations may suggest worn-out rubber couplings. Deterioration of the rubber diminishes its vibration dampening properties.
  • Unusual Noises: Any unusual sounds like squeaking or knocking might point to improper rubber coupling function and the need for inspection.
  • Altered Performance: Decline in machinery performance, such as reduced torque transmission or higher energy consumption, can indicate coupling wear.

Regular inspections, visual checks, vibration analysis, and performance monitoring can help detect wear and deterioration early. This enables timely replacement and avoids operational problems.

rubber coupling

Types of Rubber Couplings Designed for Specific Uses

There are several types of rubber couplings, each designed with specific characteristics to suit various applications:

  • Flexible Jaw Couplings: These couplings consist of two hubs connected by a flexible rubber element. They are commonly used in applications where misalignment, vibrations, and shocks need to be dampened, such as in pumps, fans, and compressors.
  • Oldham Couplings: Oldham couplings use a rubber disk as the intermediate element between two hubs. They provide compensation for misalignment while maintaining a constant velocity between input and output shafts, often used in printing, packaging, and CNC machinery.
  • Tyre Couplings: These couplings have a high degree of torsional flexibility and are suitable for applications with substantial misalignment and shock absorption requirements, like in heavy-duty machinery and construction equipment.
  • Pin and Bush Couplings: These couplings use rubber bushes to provide vibration isolation and accommodate misalignment. They are used in various industrial applications, including conveyors, mixers, and crushers.
  • Diaphragm Couplings: Diaphragm couplings use a flexible rubber diaphragm to transmit torque and compensate for misalignment. They are commonly found in precision equipment like servo motors and robotics.

Each type of rubber coupling is designed to address specific needs in different applications. The choice of coupling depends on factors such as the degree of misalignment, torque requirements, shock absorption, and the level of precision needed.

China wholesaler Stainless Steel Ss201 Double-Section Pipe Repair Coupling with CZPT Rubber Sealing Sleeve  China wholesaler Stainless Steel Ss201 Double-Section Pipe Repair Coupling with CZPT Rubber Sealing Sleeve
editor by CX 2023-09-11

China High-precision Precision Flexible Mechanical Pinion NL Nylon Inner Ring Sleeve Shaft Gear Coupling edc coupling

Warranty: 6 Months
Applicable Industries: Resorts, Garment Stores, Developing Substance Shops, Manufacturing Plant, Machinery Restore Stores, Meals & Beverage Manufacturing unit, Farms, Restaurant, Residence Use, Retail, Foods Store, Printing Outlets, Design works , Power & Mining, Food & Beverage Stores, Other, Marketing Firm
Custom-made help: OEM, ODM, OBM
Framework: Equipment
Adaptable or Rigid: Flexible
Regular or Nonstandard: Common
Content: NYLON, pa6/nylon
Coloration: Blue.Can Customise Shades
Packing: Carton Box
Size: Customer’s Drawing
Application: Electrical power Transmission
Payment: T/T thirty%/70%
Merchandise identify: nylon coupling sleeve
Utilization: Transmission Electricity Part
Delivery Time: 10-fifteen Days
Standard: Client Specification
Packaging Information: cartons packing Supply Element Inside of fifteen times
Port: China port

Our Rewards Items Description Substantial-precision Precision Flexible Mechanical Pinion NL Nylon Interior Ring Sleeve Shaft Gear Coupling

Nameplactic nylon mechanical areas
MaterialPA6
ColorWhite,black,inexperienced,nature,blue,yellow,and so forth
DiameterCustomized
Tolerance±0.05%
ShapeAs per your drawing Or the sample
Free SampleAvailable
CertificationISO9

Types of Couplings

A coupling is a device that connects two shafts and transmits power from one to the other. Its main purpose is to join two pieces of rotating equipment. It also allows for some degree of misalignment or end movement. Here are a few examples of coupling types: Beam coupling, Flexible coupling, Magnetic coupling, and Shaft coupling.
gearbox

Beam coupling

Beam couplings are used to couple motors and other devices. They are available in several types, including flexible, slit, and rigid beam couplings. Each has unique properties and characteristics. These couplings are best for applications requiring a high level of precision and long life. They are also a practical solution for the connection of stepping and servo motors with screw rods.
Beam couplings are usually made of stainless steel or aluminum alloy, and feature spiral and parallel cut designs. Multiple cuts allow the coupling to accommodate multiple beams and improve angular and parallel misalignment tolerances. Additionally, beam couplings are comparatively cheaper than other types of rotary joints, and they require minimal maintenance.
The materials of a beam coupling should be considered early in the specification process. They are typically made of aluminum or stainless steel, but they can also be manufactured from Delrin, titanium, and other engineering grade materials. Beam couplings are often available in multiple sizes to fit specific shaft diameters.
Beam couplings are a key component of motion control systems. They provide excellent characteristics when used properly, and they are a popular choice for many applications. A thorough understanding of each type of coupling will help to prevent coupling failure and enhance system performance. Therefore, it is important to choose the right coupling for your application.
Various types of beam couplings have unique advantages and disadvantages. The FCR/FSR design has two sets of three beams. It is available in both metric and inch shaft sizes. The FCR/FSR couplings are ideal for light-duty power transmission applications. A metric shaft is more suitable for these applications, while an inch shaft is preferred for heavier duty applications.
Two types of beam couplings are available from Ruland. The Ruland Flexible beam coupling has a multi-helical cut design that offers a greater flexibility than commodity beam couplings. This design allows for higher torque capabilities while minimizing wind-up. In addition, it is also more durable than its commodity counterparts.

Flexible coupling

A flexible coupling is a versatile mechanical connection that allows for the easy coupling of two moving parts. The design of these couplings allows for a variety of stiffness levels and can address a variety of problems, such as torsional vibrations or critical speed. However, there are a number of tradeoffs associated with flexible couplings.
One of the biggest issues is the installation of the coupling, which requires stretching. This problem can be exacerbated by cold temperatures. In such a case, it is vital to install the coupling properly. Using a gear clamp is one of the most important steps in a successful installation. A gear clamp will keep the coupling in place and prevent it from leaking.
Another common type of flexible coupling is the gear coupling. These couplings are composed of two hubs with crowned external gear teeth that mesh with two internally splined flanged sleeves. The massive size of the teeth makes them resemble gears. Gear couplings offer good torque characteristics but require periodic lubrication. These couplings can also be expensive and have a limited number of applications.
Another type of flexible coupling is the SDP/SI helical coupling. These couplings can accommodate axial motion, angular misalignment, and parallel offset. This design incorporates a spiral pattern that makes them flexible. These couplings are available in stainless steel and aluminum.
A flexible coupling has a wide range of applications. Generally, it is used to connect two rotating pieces of equipment. Depending on its design, it can be used to join two pieces of machinery that move in different directions. This type of coupling is a type of elastomeric coupling, which has elastic properties.
There are many types of flexible couplings available for different types of applications. The purpose of a flexible coupling is to transmit rotational power from one shaft to another. It is also useful for transmitting torque. However, it is important to note that not all flexible couplings are created equally. Make sure to use a reputable brand for your coupling needs. It will ensure a reliable connection.
The simplest and most commonly used type of flexible coupling is the grid coupling. This type of coupling uses two hubs with slotted surfaces. The steel grid is allowed to slide along these slots, which gives it the ability to flex. The only limitation of this type of coupling is that it can only tolerate a 1/3 degree misalignment. It can transmit torques up to 3,656 Nm.
gearbox

Magnetic coupling

Magnetic coupling is a technique used to transfer torque from one shaft to another using a magnetic field. It is the most common type of coupling used in machinery. It is highly effective when transferring torque from a rotating motor to a rotating shaft. Magnetic couplings can handle high torques and high speeds.
Magnetic coupling is described by the energy difference between a high-spin state and a broken symmetry state, with the former being the energy of a true singlet state. In single-determinant theories, this energy difference is called the Kij. Usually, the broken-symmetry state is a state with two interacting local high-spin centers.
The magnetic coupling device is regarded as a qualitative leap in the reaction still industry. It has solved a number of problems that had plagued the industry, including flammability, explosiveness, and leakage. Magnetic couplings are a great solution for many applications. The chemical and pharmaceutical industries use them for various processes, including reaction stills.
Magnetic couplings are a good choice for harsh environments and for tight spaces. Their enclosed design keeps them fluid and dust-proof. They are also corrosion-resistant. In addition, magnetic couplings are more affordable than mechanical couplings, especially in areas where access is restricted. They are also popular for testing and temporary installations.
Another use for magnetic coupling is in touch screens. While touch screens use capacitive and resistive elements, magnetic coupling has found a cool new application in wireless charging. While the finger tracking on touch screens may seem like a boley job, the process is very sensitive. The devices that use wireless charging need to have very large coils that are locked into resonant magnetic coupling.
Magnetic couplings also help reduce hydraulic horsepower. They cushion starts and reduce alignment problems. They can also improve flow in oversized pumps. A magnetic coupling with an 8 percent air gap can reduce hydraulic HP by approximately 27 percent. In addition, they can be used in aggressive environments. They also help reduce repair costs.
Magnetic couplings are a great choice for pumps and propeller systems because they have the added advantage of being watertight and preventing shaft failure. These systems also have the benefit of not requiring rotating seals.
gearbox

Shaft coupling

A shaft coupling joins two shafts and transmits rotational motion. Generally, shaft couplings allow for some degree of misalignment, but there are also torque limiters. Selecting the right coupling can save you time and money and prevent equipment downtime. Here are the main features to consider when purchasing a coupling for your application.
Shaft couplings should be easy to install and disassemble, transmit full power to the mated shaft, and reduce shock loads. A shaft coupling that does not have projecting parts should be used for machines that move or rotate at high speeds. Some types of shaft couplings are flexible while others are rigid.
Shaft couplings can be used in a variety of applications, including piping systems. They can be used to connect shafts that are misaligned and help maintain alignment. They can also be used for vibration dampening. Shaft couplings also allow shafts to be disconnected when necessary.
Shaft couplings can accommodate a certain amount of backlash, but this backlash must be well within the tolerance set by the system. Extremely high backlash can break the coupling and cause excessive wear and stress. In addition, excessive backlash can lead to erratic alignment readings. To avoid these issues, operators must reduce backlash to less than 2deg.
Shaft couplings are often referred to by different names. Some are referred to as “sliced” couplings while others are known as “slit” couplings. Both types offer high torque and torsional stiffness. These couplings are typically made from metals with various alloys, such as acetal, stainless steel, or titanium.
CZPT Pulley produces shaft couplings for a variety of applications. These products are used in high-power transmission systems. They have several advantages over friction couplings. In addition to minimizing wear, they don’t require lubrication. They are also capable of transmitting high torque and high speeds.
Another type of shaft coupling is the universal coupling. It is used to transmit power to multiple machines with different spindles. Its keyed receiving side and flanges allow it to transmit power from one machine to another.
China High-precision Precision Flexible Mechanical Pinion NL Nylon Inner Ring Sleeve Shaft Gear Coupling     edc couplingChina High-precision Precision Flexible Mechanical Pinion NL Nylon Inner Ring Sleeve Shaft Gear Coupling     edc coupling
editor by czh