China wholesaler Working Pressure 300psi 168, 3mm Grooved Flexible Rubber Gasket Coupling with Bolts and Nuts

Product Description

 

GROOVED FLEXIBLE COUPLINGS PRODUCTS SERISE

Detailed Photos

 

 

 

Product Description

STAINLESS STEEL GROOVED FLEXIBLE COUPLINGS SPECIFICATION

MATERIAL SPECIFICATIONS

Housing : Stainless steel 304(CF8) or 316L(CF3M)

Rubber Gasket : Standard gasket is EPDM(Ethylene-Propylene-Diene Monomer), the range of working temperature is -50ºC-150ºC,using for cold water,hot water and rare alkaline chemical products.

Bolt&Nuts : Stainless steel bolts&nuts according to international standard models of carriage bolts and flange nuts.Nut is SS304 material.

According to ASTM A743 standard for housing material
–Type 304 to ASTM A743 CF8(304)
–Type 316L to ASTM A743 CF3M(316L)

 

 

Monitoring device

 

Our Advantages

Housing:
Stainless steel is used as raw material with good corrosion resistance. And there is the natures which is high strength, good toughness and good mechanical properties. According to the precision casting process, the precision of the clamping size is guaranteed.The material has tensile strength which is not less than 600 MPA and the extension is not less than 15%. withstands high pressure and high impact of pipeline by several disadvantage factors.

Gasket :
The gasket seal with special C-shaped design, that is perfect matching with pipeline dimension in order to achieve working pressure.The gasket is tightener while further pressed in order to achieve sealing efficiency.when the Meanwhile, the imported raw material will also be guaranteed the mechanical properties.

Scope of application

ZheJiang Morui Environment&Technology Co., Ltd. (refer to ZheJiang MR), is professional company which is committed to become processing manufacturer of pipeline system solutions. Located in the ZheJiang High-tech Zone as headquarter. There are several branches in ZheJiang , ZheJiang and ZheJiang provinces.

We are not only processing manufacturer, but also it has the own sales and service network. We are able to grasp accurately the clients’ “pain points” that the clients faced. And provide the proper solutions immediately. Because we have the excellent team who are focusing on follow-up service.

The ZheJiang MR company’s products have been widely used in the field of MF, UF and RO system, sewage water system, water supply and drainage, high-pressure desalination system, such as garbage infiltration liquid, electronic, chemical industry, air-conditioning and so on. Our products are compliance with international first-class standard(GB, ASTM, DIN and JIS). Meanwhile providing the professional before-sale and after-sale service to our clients.

 

Certifications

 

FAQ

Qn1: Are you the factory or trading company?

Ans: We are the factory of manufacturing flexible grooved couplings. There are 2 different types ,including plastic and stainless steel. They are mainly applicable in RO,UF and NF system.
The size is from 1″ to 8″, which is satisfied with water treatment.

Qn2:where is your factory located?
Ans:Our factory is located in B6-2,South Park,Guangda Green Industrial Zone,Xihu (West Lake) Dis. District,ZheJiang ,China.  

Qns3: How about the working pressure of grooved couplings?
Ans: For plastic grooved couplings, normally are used in UF system. The Working pressure is up to 10bar with small size. For the larger size,up to 6bar,such like 2-1/2″ and 3″.
For stainless steel, there are 4 steps of working pressure. Low pressure(300psi),medium pressure(600psi), high pressure(1000psi) and ultra-high pressure(1500psi).

Qn4: Can I have sample provided?
Ans: Yes, we can provide sample.

Qn5: When can we get sample?
Ans: For standardized components with stock in hand, we’re ready for preparing within 2 working days.

Qn6: How can you ensure the quality of finished products?
Ans: There are several components to consists of finished goods,such as housing, gasket and bolts and nuts with any kinds of sizes. Excepts inspectors, we have several testing machines, like spectrographic analysis instrument, universal testing machine, impact machine and metallographic microscope to ensure the 100% sample selected be tested.
  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

rubber coupling

Diagnosing and Troubleshooting Rubber Coupling Issues

Diagnosing and troubleshooting problems with rubber couplings in machinery systems involves a systematic approach:

  1. Visual Inspection: Check for signs of wear, cracking, or deformation in the rubber elements.
  2. Vibration Analysis: Monitor vibration levels using sensors to identify excessive vibrations or irregular patterns.
  3. Noise Assessment: Listen for unusual noises during operation, which could indicate misalignment or worn components.
  4. Temperature Check: Monitor the operating temperature of the coupling, as overheating might indicate issues.
  5. Alignment Check: Ensure proper alignment between connected shafts to prevent excessive stress on the coupling.
  6. Torque Measurement: Measure the transmitted torque to identify any discrepancies from the expected values.
  7. Dynamic Testing: Conduct dynamic tests with load variations to identify performance issues.
  8. Comparative Analysis: Compare coupling behavior to baseline performance data.

If any issues are identified, they should be promptly addressed through proper maintenance, realignment, or replacement of damaged components.

rubber coupling

Industry Standards and Guidelines for Rubber Couplings

There are no specific industry standards or guidelines that exclusively govern the design and application of rubber couplings. However, various general standards and engineering practices apply to flexible couplings, including rubber couplings:

  • ISO 14691: This standard provides guidelines for the installation, use, and maintenance of industrial flexible couplings, which include rubber couplings.
  • AGMA 9005: The American Gear Manufacturers Association (AGMA) standard provides information on selecting lubricants and lubrication methods for flexible couplings, ensuring proper performance and longevity.
  • API 671: This API standard specifies the requirements for special-purpose couplings used in petroleum, chemical, and gas industry services, which can include rubber couplings for specific applications.
  • Manufacturer Recommendations: Many rubber coupling manufacturers provide guidelines, specifications, and installation instructions for their products, helping users select the right coupling and use it correctly.

Since rubber couplings fall under the category of flexible couplings, engineers and designers can follow these broader standards and best practices while considering the specific characteristics and performance requirements of rubber couplings for their applications.

rubber coupling

Role of Rubber Flexibility in Accommodating Misalignment

Rubber couplings are designed with a flexible element, usually made of elastomers, that plays a crucial role in accommodating misalignment between connected shafts. The flexibility of the rubber element allows it to deform and absorb angular, axial, and radial misalignments, providing several benefits:

1. Angular Misalignment: When the input and output shafts are not perfectly aligned in terms of angle, the rubber element can flex and twist, allowing the coupling to transmit torque even when the axes are not parallel.

2. Axial Misalignment: Axial misalignment occurs when the shafts move closer together or farther apart along their axis. The rubber element can compress or extend, adjusting the distance between the shafts without hindering torque transfer.

3. Radial Misalignment: Radial misalignment refers to the offset between the centers of the shafts. The rubber element can bend in response to radial displacement, ensuring that the coupling remains operational while accommodating the offset.

This flexibility not only enables the rubber coupling to handle misalignment but also helps prevent excessive stress on the connected machinery. By absorbing shock loads and distributing forces, the rubber element reduces wear and tear on components and minimizes the risk of premature failure.

In essence, the rubber’s flexibility in the coupling acts as a buffer against misalignment-induced stresses, contributing to smoother operation, improved longevity, and reduced maintenance in mechanical systems.

China wholesaler Working Pressure 300psi 168, 3mm Grooved Flexible Rubber Gasket Coupling with Bolts and Nuts  China wholesaler Working Pressure 300psi 168, 3mm Grooved Flexible Rubber Gasket Coupling with Bolts and Nuts
editor by CX 2024-04-08